T12 Tips / T12 Soldering Bit

T12 soldering tips

HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

T12-C1 Soldering Tip

Replacement T12-C1 Soldering Tip, 1.0*12.0mm, 60Bevel

Used for drag soldering and pre-tinning of lead wires.

T12-C1 Soldering Tip

HAKKO T12-C1 Soldering Tip Specifications: 

T12-C1

  • Shape 1C, 1.0mm bevel w/ 60o angle
  • External Diameter: 5.5mm, Total Length 139mm+12mm, Tip R1.0*12mm
  • Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-BL Soldering Tip

Replacement T12-BL Soldering Tip, 0.2*12.0mm, Conical

All-round type which can be used from any direction and is easy to hold at any position. Possible to solder any surface from small to large.

T12-BL Heater

HAKKO T12-BL Soldering Tip Specifications: 

T12-BL

  • Shape BL, 0.2mm conical, all round type
  • External Diameter: 5.5mm, Total Length 139mm+12mm, Tip R0.2*12mm
  • Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-BC2 Soldering Tip

T12-BC2 Soldering Tip, 2.0*11.5mm 45o Bevel

This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece. It is used for drag soldering and pre-tinning of lead wires.

T12-BC2 Soldering Tip

HAKKO T12-BC2 Soldering tip specs:

T12-BC2

  • SOLDERING TIP, BEVEL, SHAPE 1BC
  • Tip / Nozzle Width: 2.0 mm
  • Tip / Nozzle Style: 45° Bevel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Body Diameter: 2.0 mm
  • Operating Temperature Max: 450°C
  • Tip Length: 11.5mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

 

T12-D12 Soldering Tip

T12-D12 Soldering Tip, 1.2mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-D12 Soldering Tip

HAKKO T12-D12 Soldering tip specs:

T12-D12

  • SOLDERING TIP, CHISEL, SHAPE 1.2D
  • Tip / Nozzle Width: 1.2 mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 10.0mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-DL52 Soldering Tip

T12-DL52 Soldering Tip, 5.2mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-DL52 Soldering Tip

HAKKO T12-DL52 Soldering tip specs:


T12-DL52

  • SOLDERING TIP, CHISEL, SHAPE 5.2DL
  • Tip / Nozzle Width: 5.2 mm
  • Tining area: 9mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 16.0 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-D16 Soldering Tip

T12-D16 Soldering Tip, 1.6mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-D16 Soldering Tip

HAKKO T12-D16 Soldering tip specs:

T12-D16

  • SOLDERING TIP, CHISEL, SHAPE 1.6D
  • Tip / Nozzle Width: 1.6 mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 10.0mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-KU Soldering Tip

T12-KU Soldering Tip, 3.0mm Kinfe

This type has a shape like a knife and is capable of soldering by applying the tip in 3 ways: line, face and point.

It is used for soldering at narrow pitches, correction of bridging and drag soldering.

T12-KU Soldering Tip

HAKKO T12-KU Soldering tip specs:


T12-KU

  • SOLDERING TIP, CHISEL, SHAPE KU
  • Tip / Nozzle Width: 3.0 mm
  • Kinfe thickness: 1.2 mm
  • Tip / Nozzle Style: Knife
  • Kinfe angle: 45o
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 11 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-D52 Soldering Tip

T12-D52 Soldering Tip, 5.2mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-D52 Soldering Tip

HAKKO T12-D52 Soldering tip specs:

T12-D52

  • SOLDERING TIP, CHISEL, SHAPE 5.2D
  • Tip / Nozzle Width: 5.2 mm
  • Tining area: 7mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 8.0 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-B2 Soldering Tip

Replacement HAKKO T12-B2 Soldering Tip, 0.5mm Conical

Possible to solder any surface from small to large.

T12-B2 Soldering Tip

 

T12-B2 Soldering Tip Specifications: 

T12-B2

  • Shape B, 0.5mm conical, all round type
  • External Diameter: 5.5mm, Total Length 139mm+10mm, Tip R0.5*10mm
  • Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

 

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

 

T12-KR Soldering Tip

T12-KR Soldering Tip, 4.7mm Kinfe

For drag soldering for right-handed.

This type has a shape like a knife and is capable of soldering by applying the tip in 3 ways: line, face and point.
It is used for soldering at narrow pitches, correction of bridging and drag soldering.

T12-KR Soldering Tip

HAKKO T12-KR Soldering tip specs:


T12-KR

  • SOLDERING TIP, CHISEL, SHAPE KR
  • Tip / Nozzle Width: 4.7 mm
  • Kinfe thickness: 1.5 mm
  • Tip / Nozzle Style: Knife
  • Kinfe angle: 45o
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 11 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-B Soldering Tip

Replacement HAKKO T12-B Soldering Tip, 0.2mm Conical

All-round type which can be used from any direction and is easy to hold at any position. Possible to solder any surface from small to large.

T12-B Soldering Tip

HAKKO T12-B Specifications:

T12-B

  • 0.2mm Conical, all round type
  • External Diameter: 5.5mm
  • Total Length: 139mm+7.5mm
  • Tip R0.2*7.5mm
  • Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-BC1 Soldering Tip

T12-BC1 Soldering Tip, 1.0*11.5mm 45o Bevel

HAKKO T12-BC1 Soldering tip specs:

  • SOLDERING TIP, BEVEL, SHAPE 1BC
  • Tip / Nozzle Width: 1.0 mm
  • Tip / Nozzle Style: 45° Bevel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Body Diameter: 1.0 mm
  • Operating Temperature Max: 450°C
  • Tip Length: 11.5mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-I Soldering Tip

T12-I Soldering Tip, 0.2mm Thin Conical

This type has a thin conical end and is an ultrafine tip which is best suited for soldering at narrow pitches, etc. 
It is the best for soldering micro components such as 0603, etc. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc.

T12-I Soldering Tip

HAKKO T12-I Soldering tip specs:


T12-I

  • SOLDERING TIP, CHISEL, SHAPE I
  • Tip / Nozzle Width: 0.2 mm
  • Tip / Nozzle Style: Thin Conical
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 9.5 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-KL Soldering Tip

T12-KL Soldering Tip, 4.7mm Kinfe

For drag soldering for left-handed.

This type has a shape like a knife and is capable of soldering by applying the tip in 3 ways: line, face and point.
It is used for soldering at narrow pitches, correction of bridging and drag soldering.

T12-KL Soldering Tip

HAKKO T12-KL Soldering tip specs:


T12-KL

  • SOLDERING TIP, CHISEL, SHAPE KL
  • Tip / Nozzle Width: 4.7 mm
  • Kinfe thickness: 1.5 mm
  • Tip / Nozzle Style: Knife
  • Kinfe angle: 45o
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 11 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-BC3 Soldering Tip

T12-BC3 Soldering Tip, 3.0*10.0mm 45o Bevel

This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece. It is used for drag soldering and pre-tinning of lead wires.

HAKKO T12-BC3

HAKKO T12-BC3 Soldering tip specs:

HAKKO T12-BC3

  • SOLDERING TIP, BEVEL, SHAPE 1BC
  • Tip / Nozzle Width: 3.0 mm
  • Tip / Nozzle Style: 45° Bevel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Body Diameter: 3.0 mm
  • Operating Temperature Max: 450°C
  • Tip Length: 10.0mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-DL32 Soldering Tip

T12-DL32 Soldering Tip, 3.2mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-DL32 Soldering Tip

HAKKO T12-DL32 Soldering tip specs:


T12-DL32

  • SOLDERING TIP, CHISEL, SHAPE 3.2DL
  • Tip / Nozzle Width: 3.2 mm
  • Tining area: 7mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 10.0 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-IL Soldering Tip

T12-IL Soldering Tip, 0.2mm Thin Conical

This type has a thin conical end and is an ultrafine tip which is best suited for soldering at narrow pitches, etc. 
It is the best for soldering micro components such as 0603, etc. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc.

T12-IL Soldering Tip

HAKKO T12-IL Soldering tip specs:


T12-IL

  • SOLDERING TIP, CHISEL, SHAPE I
  • Tip / Nozzle Width: 0.2 mm
  • Tip / Nozzle Style: Thin Conical
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 12.7 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-JL02 Soldering Tip

T12-JL02 Soldering Tip, 0.2mm Bent Conical

This type differs from Shape B and I by bending the tip end and is capable of soldering by applying the tip in 2 ways: face and point. 
It is used for drag soldering and correction of bridging.

T12-JL02

HAKKO T12-JL02 Soldering tip specs:


T12-JL02

  • SOLDERING TIP, CHISEL, SHAPE 0.2JL
  • Tip / Nozzle Width: 0.2 mm
  • Tip / Nozzle Style: Bent Conical
  • Bent angle: 30o
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 9.3+7.5 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-K Soldering Tip

T12-K Soldering Tip, 4.7mm Kinfe

This type has a shape like a knife and is capable of soldering by applying the tip in 3 ways: line, face and point.
It is used for soldering at narrow pitches, correction of bridging and drag soldering.

T12-K Soldering Tip

HAKKO T12-K Soldering tip specs:


T12-K

  • SOLDERING TIP, CHISEL, SHAPE K
  • Tip / Nozzle Width: 4.7 mm
  • Kinfe thickness: 2.0mm
  • Tip / Nozzle Style: Knife
  • Kinfe angle: 45o
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 15 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-J02 Soldering Tip

T12-J02 Soldering Tip, 0.2mm Bent Conical

This type differs from Shape B and I by bending the tip end and is capable of soldering by applying the tip in 2 ways: face and point. 
It is used for drag soldering and correction of bridging.

T12-J02 Soldering Tip

HAKKO T12-J02 Soldering tip specs:


T12-J02

  • SOLDERING TIP, CHISEL, SHAPE 0.2J
  • Tip / Nozzle Width: 0.2 mm
  • Tip / Nozzle Style: Bent Conical
  • Bent angle: 30o
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 12+3.5 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-KF Soldering Tip

T12-KF Soldering Tip, 4.7mm Kinfe

This type has a shape like a knife and is capable of soldering by applying the tip in 3 ways: line, face and point.
It is used for soldering at narrow pitches, correction of bridging and drag soldering.

T12-KF Soldering Tip

HAKKO T12-KF Soldering tip specs:


T12-KF

  • SOLDERING TIP, CHISEL, SHAPE KF
  • Tip / Nozzle Width: 4.7 mm
  • Kinfe thickness: 2.4 mm
  • Tip / Nozzle Style: Knife
  • Kinfe angle: 45o
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 17 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-ILS Soldering Tip

T12-ILS Soldering Tip, 0.15mm Thin Conical

This type has a thin conical end and is an ultrafine tip which is best suited for soldering at narrow pitches, etc. 
It is the best for soldering micro components such as 0603, etc. and for repairing high-density-mounting P.W.Bs. such as in cellular phones, etc.

T12-ILS Soldering Tip

HAKKO T12-ILS Soldering tip specs:


T12-ILS

  • SOLDERING TIP, CHISEL, SHAPE I
  • Tip / Nozzle Width: 0.15 mm
  • Tip / Nozzle Style: Thin Conical
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 13.5 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-D24 Soldering Tip

T12-D24 Soldering Tip, 2.4mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-D24 Soldering Tip

HAKKO T12-D24 Soldering tip specs:

T12-D24

  • SOLDERING TIP, CHISEL, SHAPE 2.4D
  • Tip / Nozzle Width: 2.4 mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 10.0mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-C4 Soldering Tip

Replacement T12-C4 Soldering Tip, 4.0*11.5mm, 45Bevel

Used for drag soldering and pre-tinning of lead wires.

T12-C4 Soldering Tip

HAKKO T12-C4 Soldering Tip Specifications: 

T12-C4

  • Shape 4C, 4.0mm bevel w/ 45o angle
  • External Diameter: 5.5mm, Total Length 139mm+11.5mm, Tip R4.0*11.5mm
  • Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-JS02 Soldering Tip

T12-JS02 Soldering Tip, 0.2mm Bent Conical

This type differs from Shape B and I by bending the tip end and is capable of soldering by applying the tip in 2 ways: face and point. 
It is used for drag soldering and correction of bridging.

T12-JS02 Soldering Tip

HAKKO T12-JS02 Soldering tip specs:


T12-JS02

  • SOLDERING TIP, CHISEL, SHAPE 0.2JS
  • Tip / Nozzle Width: 0.2 mm
  • Tip / Nozzle Style: Bent Conical
  • Bent angle: 30o
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 7.9+1.6 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-B2Z Soldering Tip, Long Life Type

HAKKO T12-B2Z soldering tip, 0.5mm conical long life type

All round type iron tips are possible to solder any surface from small to large.

T12-B2 Soldering Tip

HAKKO T12-B2 soldering tip specifications

T12-B2

  • Shape 0.5D, size 0.5*10mm, conical
  • External Diameter: 5.5mm, Total Length 139 mm, Tip R0.5*10mm
  • Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

 

T12-WB2 Soldering Tip, Heavy duty type

T12-WB2 Soldering Tip

Name: HAKKO T12-WB2 soldering tip, shape 0.5WB

Heavy duty type

T12-WB2

Tip diameter: 0.5mm

Tip length: 11mm

Total length: 139mm+11mm

Compatible With:

HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

T12-D08 Soldering Tip

T12-D08 Soldering Tip, 0.8mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-D08 Soldering Tip

HAKKO T12-D08 Soldering tip specs:

T12-D08

  • SOLDERING TIP, CHISEL, SHAPE 0.8D
  • Tip / Nozzle Width: 0.8 mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 9.5mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-DL12 Soldering Tip

T12-DL12 Soldering Tip, 1.2mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-DL12 Soldering Tip

HAKKO T12-DL12 Soldering tip specs:


T12-DL12

  • SOLDERING TIP, CHISEL, SHAPE 1.2DL
  • Tip / Nozzle Width: 1.2 mm
  • Tining area: 3mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 13.0 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-B4 Soldering Tip

T12-B4 Soldering Tip, 0.4*5.0mm Conical

T12-B4 Soldering Tip

HAKKO T12-B4 Soldering Tip Specification:

T12-B4

External Diameter: 5.5mm, Total Length 139mm+5mm, Tip R0.4*5mm
Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

 

T12-B3 Soldering Tip

HAKKO T12-B3 Soldering Tip, 0.7*5mm Conical

All-round type which can be used from any direction and is easy to hold at any position. 
Possible to solder any surface from small to large.

T12-B3 Soldering Tip

T12-B3 conical soldering tip specification:

T12-B3

  • 0.7mm conical tip
  • External Diameter: 5.5mm, Total Length 139mm+5mm, Tip R0.7*5mm
  • Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-DL08 Soldering Tip

T12-DL08 Soldering Tip, 0.8mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

HAKKO T12-DL08 Soldering tip specs:


T12-DL08

  • SOLDERING TIP, CHISEL, SHAPE 0.8DL
  • Tip / Nozzle Width: 0.8 mm
  • Tining area: 3mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 13.0 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-BCM2 Soldeirng Tip

T12-BCM2 Soldering Tip, 2.0*11.5mm 45o Bevel with hollow

This type differs from Shape BC by the addition of a hollow to its cut face, providing high solder retention capability. 
It is used for drag soldering and correction of bridging.

T12-BC2 Soldering Tip

HAKKO T12-BCM2 Soldering tip specs:

T12-BCM2 T12 soldering tip, BCM shape

  • SOLDERING TIP, BEVEL, SHAPE 1BC
  • Tip / Nozzle Width: 2.0 mm
  • Tip / Nozzle Style: 45° Bevel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Body Diameter: 2.0 mm
  • Operating Temperature Max: 450°C
  • Tip Length: 11.5mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-C08 Soldering Tip

Replacement T12-C08 Soldering Tip, 0.8*12.0mm, 60Bevel

Used for drag soldering and pre-tinning of lead wires.

HAKKO T12-C08 Soldering Tip Specifications: 

T12-C08

  • Shape 0.8C, 0.8mm bevel w/ 60o angle

     

  • External Diameter: 5.5mm, Total Length 139mm+12mm, Tip R0.8*12mm
  • Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-BCM3 Soldering Tip

T12-BCM3 Soldering Tip, 3.0*10.0mm 45o Bevel with hollow

This type differs from Shape BC by the addition of a hollow to its cut face, providing high solder retention capability. 
It is used for drag soldering and correction of bridging.

T12-BC3 Heater

HAKKO T12-BCM3 Soldering tip specs:

T12-BCM3 

T12 soldering tip, BCM shape

Shape BC V.S. Shape BCM

  • SOLDERING TIP, BEVEL, SHAPE 3BC
  • Tip / Nozzle Width: 3.0 mm
  • Tip / Nozzle Style: 45° Bevel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Body Diameter: 3.0 mm
  • Operating Temperature Max: 450°C
  • Tip Length: 10.0mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-D4 Soldering Tip

T12-D4 Soldering Tip

Item Name: T12-D4 Soldering Tip, shape-4D

Features:

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

 

Specifications:

T12-D4

External Diameter: 5.5mm,

Total Length 139mm+8.5mm,

Tip width: 4mm, Tip Length: 8.5mm

Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

T12-1402 Soldering Tip

T12-1402, SMD Spatula Type

T12-1405 Soldering Tip

T12-1402 Size Drawing:

T12-1402

Features: SMD type, This type is capable of heating plural pins or lead wires at once and is used for rework of SMDs. 
Soldering for thermal compression of flexible P.W.B., shield cases, connecter, etc.

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Cleaning Notes:

  • Work 100 is  the reserved profile for tip cleaning via compressed air(blue outlet)
  • If the sponge cleaner is utilized,air-blow cleaning is normally not required.
  • Some application require air-blow &sponge tip cleaning(depending upon tip type)
  • Standard cleaning duration is 0.5 second
  • The iron tip does not need to be extended if not required
  • The air-blow cup is not included with the standard Luna system

T12-KFZ Soldering Tip

T12-KFZ Soldering Tip, 4.6mm Kinfe

This type has a shape like a knife and is capable of soldering by applying the tip in 3 ways: line, face and point.
It is used for soldering at narrow pitches, correction of bridging and drag soldering.

T12-KF Soldering Tip

HAKKO T12-KFZ Soldering tip specs:


T12-KFZ

  • SOLDERING TIP, CHISEL, SHAPE KF
  • Tip / Nozzle Width: 4.6 mm
  • Kinfe thickness: 2.4 mm
  • Tip / Nozzle Style: Knife
  • Kinfe angle: 45o
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 17 mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-1404 Soldering Tip

Leisto's production Hakko soldering tips have good performance such as low temperature difference (plus-minus 10 degree), smooth solder wetting performance. The great base copper & precise plating technology improves the thermal conductivity and reduce the temperature recovery time. The soldering tip can make the robots get the most out of automated soldering: working stable, low faulty soldering joints.

T12-1404 Soldering Tip

Advantages:

No.1: Our price is more favorable than others.

No.2: Longer service life.

No.3:High Efficiency.

No.4: Short production cycle.

No.5: Perfect after-sales service .

No.6: Free sample.

Tip Cleaning Profile Notes:

01)Work 100 is  the reserved profile for tip cleaning via compressed air(blue outlet)

02)If the sponge cleaner is utilized,air-blow cleaning is normally not required.

03)Some application require air-blow &sponge tip cleaning(depending upon tip type)

04)Standard cleaning duration is 0.5 second

05)The iron tip does not need to be extended if not required

06)The air-blow cup is not included with the standard Luna system

T12-BC2Z Soldering Tip, Long Life Type

T12-BC2Z Soldering Tip, 2.0*11.5mm 45o Bevel

This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece. It is used for drag soldering and pre-tinning of lead wires.

T12-BC2 Soldering Tip

HAKKO T12-BC2Z Soldering tip specs:

T12-BC2

  • SOLDERING TIP, BEVEL, SHAPE 1BC
  • Tip / Nozzle Width: 2.0 mm
  • Tip / Nozzle Style: 45° Bevel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Body Diameter: 2.0 mm
  • Operating Temperature Max: 450°C
  • Tip Length: 11.5mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-D16Z Soldering Tip, Long life type

T12-D16Z Soldering Tip, 1.6mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-D16 Soldering Tip

HAKKO T12-D16 Soldering tip specs:

T12-D16Z

  • SOLDERING TIP, CHISEL, SHAPE 1.6D
  • Tip / Nozzle Width: 1.6 mm
  • Tining area: 5mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 10.0mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-BC3Z Long Life Type Soldering Tip

Leisto's production Hakko soldering tips have good performance such as low temperature difference (plus-minus 10 degree), smooth solder wetting performance. The great base copper & precise plating technology improves the thermal conductivity and reduce the temperature recovery time. The soldering tip can make the robots get the most out of automated soldering: working stable, low faulty soldering joints.

T12-BC3 Heater

Item Name: T12-BC3Z soldering tip, shape-3BC

* This is the long life type soldering tip.

Features: This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece. It is used for drag soldering and pre-tinning of lead wires.

Specification:

T12-BC3Z

External Diameter: 5.5mm,

Slant Angle: 45°,

Total Length 139mm+10mm,

Tip R3.3*10mm

Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Advantages:

No.1: Our price is more favorable than others.

No.2: Longer service life.

No.3:High Efficiency.

No.4: Short production cycle.

No.5: Perfect after-sales service .

No.6: Free sample.

Tip Cleaning Profile Notes:

01)Work 100 is  the reserved profile for tip cleaning via compressed air(blue outlet)

02)If the sponge cleaner is utilized,air-blow cleaning is normally not required.

03)Some application require air-blow &sponge tip cleaning(depending upon tip type)

04)Standard cleaning duration is 0.5 second

05)The iron tip does not need to be extended if not required

06)The air-blow cup is not included with the standard Luna system

 

T12-D24Z Soldering Tip, long life type

T12-D24Z Soldering Tip, 2.4mm Chisel

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-D24 Soldering Tip

HAKKO T12-D24Z Soldering tip specs:

T12-D24Z

  • SOLDERING TIP, CHISEL, SHAPE 2.4D
  • Tip / Nozzle Width: 2.4 mm
  • Tining area: 6mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 10.0mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-BZ Soldering Tip, Long life type

Replacement T12-B Soldering Tip, 0.2*8.0mm, Conical

Long Life Type.
All-round type which can be used from any direction and is easy to hold at any position. Possible to solder any surface from small to large.

T12-B Soldering Tip

HAKKO T12-BZ Specifications:

T12-BZ

  • 0.2mm Conical, all round type
  • External Diameter: 5.5mm
  • Total Length: 139mm+8.0mm
  • Tip R0.2*8.0mm
  • Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-1406 Soldering Tip

Leisto's production Hakko soldering tips have good performance such as low temperature difference (plus-minus 10 degree), smooth solder wetting performance. The great base copper & precise plating technology improves the thermal conductivity and reduce the temperature recovery time. The soldering tip can make the robots get the most out of automated soldering: working stable, low faulty soldering joints.

T12-1406 Soldering Tip

Advantages:

No.1: Our price is more favorable than others.

No.2: Longer service life.

No.3:High Efficiency.

No.4: Short production cycle.

No.5: Perfect after-sales service .

No.6: Free sample.

Tip Cleaning Profile Notes:

01)Work 100 is  the reserved profile for tip cleaning via compressed air(blue outlet)

02)If the sponge cleaner is utilized,air-blow cleaning is normally not required.

03)Some application require air-blow &sponge tip cleaning(depending upon tip type)

04)Standard cleaning duration is 0.5 second

05)The iron tip does not need to be extended if not required

06)The air-blow cup is not included with the standard Luna system

 

T12-D4Z Soldering Tip, long life type

T12-D4 Soldering Tip

Item Name: T12-D4Z Soldering Tip, shape-4D (Z)

* This model is long life type.

Features:

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

 

Specifications:

T12-D4Z

External Diameter: 5.5mm,

Total Length 139mm+10mm,

Tip width: 4mm, Tip Length: 10mm

Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

T12-1405 Soldering Tip

Leisto's production Hakko soldering tips have good performance such as low temperature difference (plus-minus 10 degree), smooth solder wetting performance. The great base copper & precise plating technology improves the thermal conductivity and reduce the temperature recovery time. The soldering tip can make the robots get the most out of automated soldering: working stable, low faulty soldering joints.

T12-1405 Soldering Tip

Advantages:

No.1: Our price is more favorable than others.

No.2: Longer service life.

No.3:High Efficiency.

No.4: Short production cycle.

No.5: Perfect after-sales service .

No.6: Free sample.

Tip Cleaning Profile Notes:

01)Work 100 is  the reserved profile for tip cleaning via compressed air(blue outlet)

02)If the sponge cleaner is utilized,air-blow cleaning is normally not required.

03)Some application require air-blow &sponge tip cleaning(depending upon tip type)

04)Standard cleaning duration is 0.5 second

05)The iron tip does not need to be extended if not required

06)The air-blow cup is not included with the standard Luna system

T12-D12Z Soldering Tip

T12-D12Z Soldering Tip, 1.2mm Chisel, Long Life Type

This type has a shape like a flat-blade screwdriver and is capable of soldering by applying the tip in 2 ways: line and face. 
The width (size of tip) suitable for the workpiece can be selected, and it can be used for any soldering work.

T12-D12 Soldering Tip

HAKKO T12-D12Z Soldering tip specs:

T12-D12Z

  • SOLDERING TIP, CHISEL, SHAPE 1.2D
  • Tip / Nozzle Width: 1.2 mm
  • Tip / Nozzle Style: Chisel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Operating Temperature Max: 450°C
  • Tip Length: 10.0mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-C4Z Soldering Tip, Long Life Type

Replacement T12-C4 Soldering Tip, 4.0*11.5mm, 45Bevel

Used for drag soldering and pre-tinning of lead wires.

T12-C4 Soldering Tip

HAKKO T12-C4Z Soldering Tip, Long life type:

T12-C4Z

  • Shape 4C, 4.1mm bevel w/ 45o angle
  • External Diameter: 5.5mm, Total Length 139mm+10.0mm, Tip R4.1*10.0mm
  • Compatible with: HAKKO FX-951/FX-950/FX-952/FM-203/FM-204/FM-206 Soldering Station.

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

T12-BC1Z Soldering Tip, Long Life Type

T12-BC1Z Soldering Tip, 1.0*11.5mm 45o Bevel

Long life type

HAKKO T12-BC1Z Soldering tip specs:

  • SOLDERING TIP, BEVEL, SHAPE 1BC
  • Tip / Nozzle Width: 1.0 mm
  • Tip / Nozzle Style: 45° Bevel
  • For Use With: For Model FX-950/FX-951 Soldering Station
  • Body Diameter: 1.0 mm
  • Operating Temperature Max: 450°C
  • Tip Length: 11.5mm

Benefits to buy T12 soldering tips in Leisto

  • 3 quality levels (A, B, C) to meet your different requirement to the quality.
  • The price is only 1/4 of HAKKO tips (no need to save money by sacrificing the quality)
  • Demo first: Leisto provides samples free of charge, buy only when you are satisfied with the quality
  • Most of the tips are available from stock
  • Custom made is available
  • Provide OEM service to help you promote your brand!

Soldering Tip Notes:

  • The iron tip for lead-free soldering oxidizes 4~5 times than leaded soldering
  • Set the temperature as low as possible, don't increase it to more than what you really need
  • Maintaining the soldering iron tips in a clean condition is the shortcut to preventing the soldering iron tips from oxidizing.
  • Make it a habit to cover the tip with new solder at the end of soldering.
  • Use wire type tip cleaner to clean the iron tip
  • Remove the oxide using chemical paste
  • Use the thermal recovery efficient soldering irons to increase the life of the tips

Get In Touch...

Technical SupportThis email address is being protected from spambots. You need JavaScript enabled to view it.

This email address is being protected from spambots. You need JavaScript enabled to view it.Product InquiryThis email address is being protected from spambots. You need JavaScript enabled to view it.

This email address is being protected from spambots. You need JavaScript enabled to view it.Skype: leistoco

Tel.: +86 755 29472883

Custom Made & OEM

Contact us if you need to make special type soldering tips. We also undertake OEM orders.

How to Buy

  1. Sample: Buyers can request samples before purchase, we offer them free of charge.
  2. MOQ: 100 pcs for soldering iron tips and 10 pcs for soldering robot tips
  3. Delivery: We can deliver to any place around the world;
  4. Lead time: 3 days for in-stock items and 15 days for non-stock items.
Top of Page